A CAD file viewer that runs in your browser. Open a model, look at it, close the tab. No installation, no account, no license.
Open Nucleo.neoInspector
Free. Your files are processed in your browser and never leave your machine.
Formerly the Nucleo CAD Inspector: the same tool, at the same address.

Formats it opens
- Solid and mesh — STEP, IGES, STL, OBJ, GLTF, PLY, 3MF
- 2D — DXF, single files or an entire folder at once
- Native —
.nucleo, the complete fixture package, see below
Drag and drop a file onto the window, or load one from a URL.
Nucleo files: the whole fixture in one file
A .nucleo file is not just geometry. It is everything needed to understand, quote
and build the fixture, in a single container:
- Solid models and STLs — the fixture and its components
- Assembly animation — how the parts go together, in sequence
- Bill of materials — what the fixture is made of
- Dimensioned PDF for every component — drawings ready to work from
- Dimensioned DXF of each component’s extents (optional) — for nesting and stock sizing
- PDF documents (optional) for each DXF
- Label/Indicators for each fixture and part, user-defined helpers for assemblers and part loading staff.
- CSV export — for pushing the bill of materials straight into an ERP system
Because neoInspector opens it in a browser, you can send that package to a customer, a colleague on the shop floor, a subcontractor or a purchasing department, and they can open it with no CAD seat, no Nucleo license and nothing to install.
That closes a familiar gap. The person who needs to understand the fixture is rarely the person with the CAD system — and the person who needs to order the steel is usually neither. One file answers all of them.
What you can do with it
- Measure — click two points and read the distance. It snaps to endpoints, midpoints, hole centers and quadrants on DXF line art, and to mesh corners and edges on solids. A reading taken on a solid is marked approx, because it comes from the tessellated mesh rather than the exact surface — which is the honest answer, and the reason this is a checking tool rather than an inspection report
- Color — color-codes closed contours blue and open ones gray. That is a diagnostic, not decoration: an open profile is the one that will not cut
- Fill — a translucent fill over closed shapes, for reading a busy sheet
- Dimensions — show or hide dimension lines, values and annotation text on DXFs. On by default; turn it off when the dimension forest hides the parts
- Orientation — the Z↑ toggle tells the viewer which way up the source CAD was. Z is PEPS, NX, Inventor and Fusion, so nothing is rotated; flip it to Y for SolidWorks, which is rotated 90° on import. Plus free rotate and a continuous spin
- Batch DXF — open a whole folder of DXFs together, which is useful when you have been sent a nested set of profiles rather than one drawing
Nesting: fitting the profiles onto sheet
A fixture is only useful once somebody cuts it, and what the laser wants is not a fixture — it is a sheet with parts on it. neoInspector nests the flat profiles onto stock you specify, so you can see how much material a fixture actually costs before committing to it.

You set the sheet size and the gap between parts, and the nester tries a number of layouts and keeps the best ones. Which one is “best” is your call, not the software’s, so it offers the two answers that pull in opposite directions:
- Fewest sheets + tightest — least material used overall
- Best remnant — the same parts arranged so the offcut is one usable rectangle rather than scrap, which matters more than raw yield if your remnant rack is where the next small job comes from
Alternative layouts sit alongside both, and two controls change how tightly it packs:
- Square up turns each part so its longest side runs across the sheet, which packs tighter. Worth trying both ways rather than leaving on
- Gap is the real bridge of metal left between parts, in the model’s own units. Set it to whatever your cutter needs
There is also a Spread slider, and it is worth knowing what it is not. Spread is proportional spacing for the on-screen grid — a tidiness control, not a cutting parameter. Set your clearance with Spread instead of Gap and you get a sheet that looks right and cuts wrong.
The status line reports what you got. For this fixture:
2 sheets of 120 × 60 in, 54% used, 48 parts. Best remnant — offcut 104.5 × 60 in in a sheet corner.
Read that percentage carefully. Parts are packed as rectangles, so it is the area of each part’s bounding box against the area of the sheets — not the metal in the parts. An L-shaped profile does not fill the rectangle around it, so the steel you actually take away is less than the figure suggests, and the material you cannot reuse is more. It is the right number for “how many sheets do I buy”; it is the wrong number to quote a customer as utilization.
Those are one job’s numbers, not a benchmark — yield depends entirely on the parts. Export nest then saves one DXF per sheet with every part in its nested position, ready for the cutter.
Four stock sizes ship as a starting point — 3000 × 1500 mm, 2000 × 1000 mm, 96 × 48 in and 120 × 60 in — and you can add your own, which are remembered. Most shops buy two or three sizes and keep them for years.
The nester has more in it than this page covers, including an experimental mode
that nests small parts into the apertures of larger ones. It is documented
properly in the tool: the Nesting Guide,
also reachable from the ? Nesting Guide button.
Your files stay on your machine
neoInspector processes everything in your browser. Nothing is uploaded, nothing is stored on our servers, and nothing is sent anywhere.
That matters, because the moment you most need a CAD viewer is usually when a customer or supplier has sent you a part you are not supposed to share. You can open it here without it leaving your computer.
Why we built it
Camtek Software builds CAM computation engines and manufacturing automation for OEMs. Reading CAD geometry accurately, across every format a customer might send, is the foundation everything else sits on — our Nucleo fixture system generates fixture geometry directly from imported solid models, and it can only do that because the import layer is solid.
neoInspector is that layer, exposed as a tool. It is free because it costs us nothing to share, and because it is a fair demonstration of what we do.
If you need CAD import, geometry processing or toolpath computation inside your own product, that is the work we do.
Related tools
Parametric 2D Studio — a parametric AI-driven 2D drawing environment, currently in development. Get in touch if you would like more information.

The Nucleo family
One fixture engine, reached in different ways. What separates them is where the work happens.
- Nucleo — fixture design software for your desktop. It generates the fixture from your solid model, on your own computer.
Nucleo.neoInspector — this page. Free, in your browser, and your files never leave your machine.
Nucleo.neoExpress — coming soon. Design a fixture yourself, in your browser: load the
part, lay out the blades and choose the settings, and Nucleo builds the fixture on our servers
for you to preview and download. Unlike neoInspector, your model is sent to us when you ask
for the fixture to be built, and neoExpress says so before anything is sent.
Sign in or register your interest.
Would rather not design it at all? With Fixture as a Service, our team designs the fixture for you.
Register your interest in Nucleo.neoExpress
Nucleo.neoExpress is coming soon. Leave your work email and we will tell you when it opens. We will email you once, about that, and use your details for nothing else.